Ceramic porcelain tile adhesive and grout 2 in 1 mixer
What is tile adhesive and tile grout-Ceramic porcelain tile adhesive and grout 2 in 1 mixer
Tile adhesive is also called tile glue, viscose cement and other names. It is a new type of material for modern decoration. It replaced the traditional sand cement. The adhesive strength is several times of cement mortar. It can effectively paste large ceramic tiles. To avoid the risk of tile falls, it has good flexibility, can prevent hollow. It is mainly used for pasting decorative materials such as internal and external wall tiles, floor tiles, etc., and is widely used in bathroom, kitchen and other building decorative places. Its main characteristics are high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction. It is an ideal bonding material. Stir directly with water and scrape it to the back of the tile for use.
The grouting material is made up of high-strength material as aggregate, cement as binder, high flow state, micro expansion, anti segregation and other materials. It can be used after adding a certain amount of water to the construction site and mixing evenly. In the aspect of construction, it has the advantages of reliable quality, low cost, short construction period and convenient use. It is an ideal grouting material in the era of no pad installation to fundamentally change the stress condition of the equipment base and make it bear all the loads of the equipment uniformly, so as to meet the installation requirements of various mechanical and electrical equipment (heavy equipment high-precision grinder).
Grouting materials are divided into high-strength non shrinkage grouting materials and support grouting materials. High strength non shrinkage grouting material: do not use in bridge, tunnel, subway, power plant, steel structure workshop; it is used for structural reinforcement or machine fixation. Because the performance of grouting material is superior to that of traditional concrete material in all aspects, and it is resistant to high temperature, abrasion and ultra-high strength.
What is tile adhesive and grout mixer?
Ceramic tile adhesive and grout mixer machine (or ceramic tile ahesive mortar production line) is a set of machinery that produces tile adhesive cement mortar for construction industry and other uses.
The production line mainly produces skim coat wall and floor tile adhesive & grout with special function for wall and floor.
The whole dry mix tile adhesive mortar production line includes Mixing machine, Raw materials Storing,Transporting and Measuring system, Packing system, De-dusting system, Electrical system and end produtct silo, etc.
Automatic ceramic tile adhesive mixing machine with high intelligent automation, the human-friendlty touchable screen is easy and visual to operate, it improve the efficiency, at the same time, reduce the unit energy consumption and labor costs significantly.
This automatic tile adhesive and grout mixer is suitable for medium or large enterprise. Automatic dry mix tile adhesive and grout plant has wide application in produce masonry mortar, plaster mortar, insulation mortar, heat preservation mortar, decoration mortar, powder putty, screed mortar, gap filler, tile grout mortar, tile adhesive mortar, tile glue, bonding mortar, paris mortar, stucco mortar, rendering mortar, premixed mortar, and so on all kinds of dry powder mortar.
Main parameters and features of tile adhesive grout mixer
1. It features magnificent appearance, good quality, high productivity and accurate mortar proportioning.
2. The dry mix mortar production line uses a centralized control system, making the equipment easy to operate.
3.According to the layout type, it can be classified into tower type, self tower type and series type. Its up to the customers workshop area. The needed area is 500~5000m2.
4. We can provide one-step service from design to installation according to our customers' specific requirement.
|
|
|
|
|
Configuration type | Simple dry mix plant | Twin shafts mixer mix line | Semi automatic dry mix plant | Full automatic dry mix plant |
Out put | 1-3t/h | 4-5t/h | 5-8t/h | 10-30t/h |
Components | screw conveyor, horizontal ribbon mixer, storage tank, packing machine, control cabinet, air compressor | screw conveyor, twin shaft mixer, storage tank, packing machine, control cabinet, air compressor | bucket elevator, twin shaft mixer, holding tank, packing machine, control cabinet, air compressor | cement silo, screw conveyor, automatic weighing system, bucket elevator, premix tank, twin shaft mixer, holding tank, packing machine, automatic control cabinet, air compressor |
Occupied area | 20m² | 20m² | 50-60m² | 60-100m² |
Total power | 5.5-7.5kw | 6-11kw | 24-28kw | 60-120kw |
Mixer volume | 3300*1050*2100(mm) | 2m³ | 2m³ | 2m³, 3m³, 4m³ |
Equipment height | 3-4m | 3-4m | 6-8m | 8-13m |
Man power | 2-3person | 2-3person | 3-4person | 3-4person |
Batching and packaging | Manual batching & Automatic packaging | Manual batching & Automatic packaging | Manual batching & Automatic packaging | Automatic batching & Automatic packaging |
How to choose suitable tile adhesive and grout mixer?
There can be divided into 3-4 types classic main configurations solution as per the output capacity, main raw materials and additives feeding automatic level, packing process automatic level. Of courese, it doens't means the more expensive or higher automatic level the better, you should choose the suitable dry mortar mix plant as per your actual demand and actual raw materials situation and what product will you produce.
1. Firstly, you should have an idea how many ton end product do you need to produce, output capacity is very important and this largely determines the scale and cost of the production line
2. Is sand dry sand available in your local, if not, one sand dryer is necessary for you because the dry mixing mortar requires sand moisture less than 0.5%, then consider what fuel for sand dryer is cheap and easy to get in your local.
3. What packing mode will you choose, choose a suitable packing mode as you want from 20-50kg bag, ton bag, tulk tanker, etc.
4. What product will you produce exactly, tell as more details as possible to your supplier consultants.
5. If possible,provide your working shop layout to your supplier for designing the solution as your actual situaiton.
6. All other details need to be attention, tell your consulator in advance.
Good supplier-Ceramic porcelain tile adhesive and grout 2 in 1 mixer
In addition to choosing reliable quality tile adhesive and grout mixer, it is also necessary to consider the professional capabilities of the supplier, the ability to design solutions based on the real needs of customers, whether it can provide low-cost and high-quality mass production formulas, and the application of finished products in the future Solutions to problems that arise, etc.
Henan Ant Constructions as one professional supplier of dry mortar plant, formula technology and additives for dry mortar and putty powder in china, not only provide customer equipment, but also provide additives, formula technology, and problem consultation during application of mortar and putty powder during construction.
Henan Ant Constructions is one of the earliest producer of kinds of dry mortar and wall putty powder in China. Therefore, it gone through the whole history of mortar and wall putty application in China and summerized rich experiences in improving mortar and putty powder formula and solutions for kinds of problems during application, such as cracking, falling off after drying, adhesive strength, thermal insulation, water retention, etc.
Henan Ant Constructions design suitable formula according to your local materials feature and also provide kinds of suitable chemical additives, cooperated lab for making different testing of additives and finished mortar is available too.
