High Speed Twin Shafts Tile Glue Mortar Mixer
What is tile adhesive?
Tile adhesive is also called tile glue, viscose cement and other names. It is a new type of material for modern decoration. It replaced the traditional sand cement. The adhesive strength is several times of cement mortar. It can effectively paste large ceramic tiles. To avoid the risk of tile falls, it has good flexibility, can prevent hollow. It is mainly used for pasting decorative materials such as internal and external wall tiles, floor tiles, etc., and is widely used in bathroom, kitchen and other building decorative places. Its main characteristics are high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction. It is an ideal bonding material. Stir directly with water and scrape it to the back of the tile for use.
Tile adhesive mortars are wildly used to interior and exterior wall , floor, bathroom and kitchen, Tile Adhesive mortars is a ideal adhesive materials to ceramic tile, brick, floor tile, it own high adhesion strength, Water resistance, anti-freeze thaw and Aging resistance.
Brief general introductions-High Speed Twin Shafts Tile Glue Mortar Mixer
Ceramic tile adhesive mixing machine is mainly composed of highly efficient null gravity paddble mixer ( dry powder mixer ), powder storage silo, screw conveyor, bucket elevator, powder weighing scale, pre-mix tank, packing machine, impulse dust collector, material level control system, air compressor system, automatic control system.
It's able to equip with grinding machine and drying machine according to requirement. Automatic ceramic tile adhesive mixing machine with high intelligent automation, the human-friendlty touchable screen is easy and visual to operate, it improve the efficiency, at the same time, reduce the unit energy consumption and labor costs significantly.
This automatic dry mortar premixed mortar plant is suitable for medium or large enterprise. Automatic dry mortar premixed mortar plant has wide application in produce masonry mortar, plaster mortar, insulation mortar, heat preservation mortar, decoration mortar, powder putty, screed mortar, gap filler, tile grout mortar, tile adhesive mortar, tile glue, bonding mortar, paris mortar, stucco mortar, rendering mortar, premixed mortar, and so on all kinds of dry powder mortar.
Main Parameters-High Speed Twin Shafts Tile Glue Mortar Mixer
| Model | Mixer volume | Capacity | Total power | Occupation area | Height | Worker required |
| ANTM2000 | 2m3 | 10-15t/h | 60-80kw | 50-60m2 | 9m | ≥4 |
| ANTM3000 | 3m3 | 15-25t/h | 80-110kw | 60-80m2 | 9.5m | ≥4 |
| ANTM4000 | 4m3 | 25-35t/h | 100-150kw | 80-100m2 | 10m | ≥4 |
| ANTM6000 | 6m3 | 35-75t/h | 120-160kw | ≥200m2 | 35m | ≥4 |
| ANTM10000 | 10m3 | 80-120t/h | 120-200kw | ≥300m2 | 35m | ≥4 |
Several common problems in the use of ceramic tile back glue.
What material is used for tiling? Cement mortar, tile binder, mortar glue, cement paste, back glue? Today, let's talk about the back glue of ceramic tile and introduce its common problems in use.
1. Can tile back glue be used on cement base?
It is not recommended, add ceramic tile adhesive or mortar adhesive only after the coating is dry. If the adhesive is also used on the cement base, it will be peeled due to too large load.
2. How about the effect of tile back glue in the water vapor environment of bathroom?
Due to the high solid content of the back glue, which belongs to the acrylic system, long-term contact with water will lead to softening and swelling of the coating film, and even lead to falling off of the tiles.
3. How to clean the back glue of ceramic tile when it is not dry?
Ceramic tile back glue belongs to acrylic system. If it does not dry and solid, it can be cleaned with alcohol or butyl acetate and other solvents.
4. What is the effect of tiling on the actual use on the second day after the application of tile back glue?
No problem, as long as the back glue in a dry environment, to avoid rain!
5. Do you want to brush back glue when tiling? What ceramic tile pastes to need to use ceramic tile back glue?
For ordinary ceramic tiles, cement mortar or ceramic tile adhesive can be used directly.
For vitrified brick, polished brick, microcrystalline stone and other porcelain bricks with high density and low water absorption, the back of the ceramic tile should be painted with the back of the brick and then pasted with cement mortar or tile adhesive.
If the floor tiles are on the wall, both should be used for safety. If the floor tiles are large, they should be hung dry glue.
