Thermoplastic Road Marking Paint Machine

Thermoplastic road marking paint mixer machine Indonesia

Describe:
Original factory manufacturer ant construction machinery-thermoplastic road marking paint MIXER, thermoplastic road marking paint mix machine, reflective traffic paint mix machine, retroreflective paint mix production line

We are here to help:Easy ways to get the answers you need.

Thermoplastic road marking paint mixer machine Indonesia

Road marking paint mixer (12).jpg

How to understand thermoplastic road marking paint?

Traffic paint is a thin layer of blended material. Paint is mainly composed of finely ground pigments that are mixed into a resin or binder system. Then various ingredients and additives are incorporated for certain desired properties. A liquid  (water or solvent) is added to the mixture to produce a material that is pliable by application equipment. All of the ingredients/components in traffic paint are added specifically for one or more of the following functions: aiding the manufacturing process, increasing storage time in containers, easing application, and increasing durability once the paint has been applied.

Choose suitable thermoplastic road paint mix production machine

Thermoplastic Road constructions traffic road line marking paint is mainly includes DOLOMITE POWDER, Quarz Sand, Glass Bead,Resin,TITANIUM DIOXIDE,PE WAX, EVA, Clay and Pitment to finish different standard features of thermoplastic paint. Therefore, we must choose suitable equipment for each stage process as per these raw materails features. Example:  if you use valve bag for the paint, you dhould choose a air-flow type valve packer due to simple normal impeller type valve packer always have problem during discharge the materials because it includes glass beads, sticky liquid oil and density and materials features are very different, because the thermoplastic paint includes liquid oil and need to be mixed with other materials uniformly, also the resin is easy to get sticky at high temperature, you had better to choose a low speed ribbon mixer. All of these critical points need to be considered when prepare the solution for the thermoplastic road paint production line. That means it is very important to choose a reliable supplier who has rich practical experience in thermoplastic marking paint production.

Main process production procedure for thermoplastic road paint

Thermoplastic marking paint mixer machine can be divided into 1 ton and 2 tons mixers according to their mixing capacity at a time. A large output mixer can be customized according to the output requirements of different customers, such as 3-5 tons mixers, even larger output can also be specially produced in our factory. No matter what output capacity of mixer, the operation process is similar, the whole process is as follows:

1, Prepare raw materials as formula.

Except the large-scale fully automatic Thermoplastic marking paint production line which automatically measures and distributes the proportions, the small prodution uses manual batching of raw materials proportion and puts the proportioned raw materials into the mixer manually for mixed production. The Thermoplastic marking paint mixer can mix powder materials and liquid materials.

2, Materials feeding.

The equipment equipped with a screw feeder directly which lifting the materials from ground to mixer. There are two feeding methods, one is to use a bucket elevator for vertical feeding, and the average feeding speed is 7 kg/s (tested with 200 mesh materials); the other is to use screw conveyor feeding inclinedly,this feeding equipment is low cost, easy production and equipment maintenance.

3, Mixing.

The mixing work is finished by thermoplastic paint mixer. Thermoplastic paint mixer is normally use single shaft ribbon bype mixer, mixing cycle time is about 5 minutes.

4, Packaging.

If the mixer equipped with a finished product silo, the air-flow valve port automatic packaging machine is connected to the finished product silo. After the material all discharged from the finished product silo, materials will be released to the packaging machine and the work only need one button operation to finish packing. If the equipment doesn't have a finished product silo, the valve port packaging machine is directly linked with the mixer discharge port for packaging. This packaging method is fast, time-saving and labor-saving.

Main applications of Thermoplastic road marking paint mixer machine Indonesia

dry mix road marking paint mixer is used in production of road marking paint, vibration type marking paint, Fluorescent paint, Two-component coating, Hot-melt marking paint, solvent-based marking paint, protruding marking paint, color anti-skid marking paint, hot melt non-slip marking paint, etc.

road marking paint.jpg

Main parameters and each part functions- Thermoplastic road marking paint mixer machine Indonesia

1, material hoister: for lifting material to  mixer.

2, the second hoister: for lifting materials to pre-mix silo.

3, the horizontal multi-ribbon mixer: for uniform mixing of material.

4, finished product silo: Storing finished material for automatic weighing and package. 

5, Automatic packer: with automatic weighing for packing finished product,

6, Control cabinet: for electrical switch controlling of the production lines.

7, Compressor: providing compressed air for air system

Capacity

1t or 2 t per batch

Working circyle

10-10 minutes

Mixer output

16-32 ton per day

automatic powder packer

10-50kg/bag

workshop area

50-100m2

worker required

3-4 person

Henan Ant Constructions is one of the earliest producer of kinds of dry mix  thermoplastic road paint mix machine in China. Therefore, it gone through the whole history of road paint application in China and summerized rich experiences in improving  formula and solutions for kinds of problems during application, such as cracking, adhesive strength, light reflection, etc. 

Henan Ant Constructions design suitable formula according to your local materials feature and also provide kinds of suitable chemical additives, cooperated lab for making different testing of additives and finished thermoplastic paint is available too. 

Do not hesitate to contact for further discussions if you have any questions about the thermoplastic road paint mix plant, formula technology, raw materials and addtives choice

dry mortar mix plant projects (3).jpg

dry mortar mix plant projects (1).jpg

Ant workingshop.jpg

shipment.jpg

Inquiry* Describe Your Buying Requirements In Detail

Related Products