Traffic road line marking paint dry mixing plant mixer machine

Definitions of thermoplatic traffic road line marking paint

Firstly let's understand what materials included in thermoplastic Road constructions traffic road line marking paint and it's chemical physical properties,thermoplastic Road constructions traffic road line marking paint is mainly includes DOLOMITE POWDER, Quarz Sand, Glass Bead,Resin,TITANIUM DIOXIDE,PE WAX, EVA, Clay and Pitment to finish different standard features of thermoplastic paint. Thermoplastic paint has significant characteristics of fast drying, thick coating, good wear-resistant, long life service and outstanding reflection stability. This paint can be used to marking screeding type flat line, spray-type anti-slip lines, convex vibrating lines and extrusion bumped lines. During the marking construction process it generally requires a heating device, called preheater, to melt powder paints into liquid state, ready for machine painting.

Choose suitable equipment for production of traffic raod line marking paint

After knowing all these materials and their features, then  we can choose suitable equipment for thermoplastic road paint mix plant.

Thermoplastic marking paint mixers can be divided into 1 ton and 2 tons mixers according to their mixing capacity at a time. A large output mixer can be customized according to the output requirements of different customers, such as 3-5 tons mixers, even larger output can also be specially produced in our factory. No matter what output capacity of mixer, the operation process is similar, the whole process is as follows:

1, Prepare raw materials as formula.

Except the large-scale fully automatic Thermoplastic marking paint production line which automatically measures and distributes the proportions, the small prodution uses manual batching of raw materials proportion and puts the proportioned raw materials into the mixer manually for mixed production. The Thermoplastic marking paint mixer can mix powder materials and liquid materials.

2, Materials feeding.

The equipment equipped with a screw feeder directly which lifting the materials from ground to mixer. There are two feeding methods, one is to use a bucket elevator for vertical feeding, and the average feeding speed is 7 kg/s (tested with 200 mesh materials); the other is to use screw conveyor feeding inclinedly,this feeding equipment is low cost, easy production and equipment maintenance.

3, Mixing.

The mixing work is finished by thermoplastic paint mixer. Thermoplastic paint mixer is normally use single shaft ribbon bype mixer, mixing cycle time is about 5 minutes.

4, Packaging.

If the mixer equipped with a finished product silo, the air-flow valve port automatic packaging machine is connected to the finished product silo. After the material all discharged from the finished product silo, materials will be released to the packaging machine and the work only need one button operation to finish packing. If the equipment doesn't have a finished product silo, the valve port packaging machine is directly linked with the mixer discharge port for packaging. This packaging method is fast, time-saving and labor-saving.

Main applications -Traffic road line marking paint dry mixing plant mixer machine

Main prameters -Traffic road line marking paint dry mixing plant mixer machine

What should be pay attention to choose a good supplier for thermoplastic  traffic road line marking paint dry mixing plant mixer machine

In addition to choosing reliable quality machinery and equipment, it is also necessary to consider the professional capabilities of the supplier, the ability to design solutions based on the real needs of customers, whether it can provide low-cost and high-quality mass production formulas, and the application of finished products in the future Solutions to problems that arise, etc.

Henan Ant Constructions is one of the earliest producer of kinds of dry mix  thermoplastic road paint mix machine in China. Therefore, it gone through the whole history of road paint application in China and summerized rich experiences in improving  formula and solutions for kinds of problems during application, such as cracking, adhesive strength, light reflection, etc. 

Henan Ant Constructions design suitable formula according to your local materials feature and also provide kinds of suitable chemical additives, cooperated lab for making different testing of additives and finished thermoplastic paint is available too.