Road line thermoplastic marking paint production machine
Introductions - Road line thermoplastic marking paint dry mix production mixer machine with automatic packing
Thermoplastic marking paint mixers can be divided into 1 ton and 2 tons mixers according to their mixing capacity at a time. A large output mixer can be customized according to the output requirements of different customers, such as 3-5 tons mixers, even larger output can also be specially produced in our factory. No matter what output capacity of mixer, the operation process is similar, the whole process is as follows:
1, Prepare raw materials as formula.
Except the large-scale fully automatic Thermoplastic marking paint production line which automatically measures and distributes the proportions, the small prodution uses manual batching of raw materials proportion and puts the proportioned raw materials into the mixer manually for mixed production. The Thermoplastic marking paint mixer can mix powder materials and liquid materials.
2, Materials feeding.
The equipment equipped with a screw feeder directly which lifting the materials from ground to mixer. There are two feeding methods, one is to use a bucket elevator for vertical feeding, and the average feeding speed is 7 kg/s (tested with 200 mesh materials); the other is to use screw conveyor feeding inclinedly,this feeding equipment is low cost, easy production and equipment maintenance.
3, Mixing.
The mixing work is finished by thermoplastic paint mixer. Thermoplastic paint mixer is normally use single shaft ribbon bype mixer, mixing cycle time is about 5 minutes.
4, Packaging.
If the mixer equipped with a finished product silo, the air-flow valve port automatic packaging machine is connected to the finished product silo. After the material all discharged from the finished product silo, materials will be released to the packaging machine and the work only need one button operation to finish packing. If the equipment doesn't have a finished product silo, the valve port packaging machine is directly linked with the mixer discharge port for packaging. This packaging method is fast, time-saving and labor-saving.
Applications-Road line thermoplastic marking paint dry mix production mixer machine with automatic packing
dry mix road marking paint mixer is used in production of road marking paint, vibration type marking paint, Fluorescent paint, Two-component coating, Hot-melt marking paint, solvent-based marking paint, protruding marking paint, color anti-skid marking paint, hot melt non-slip marking paint, etc.
Parameters -Road line thermoplastic marking paint dry mix production mixer machine with automatic packing
Type | HKS2000 |
Output Volume(m3/batch) | 1.5 |
Mixing Cycle time per batch | 10-15 mins |
Motor Power (kw) | 89 |
Rotate speed(r/min) | 24 |
Mixer Cylinder diameter (mm) | 1200 |
Mixer Cylinder Length(m) | 2.5 |
Mixer Cylinder Volume (m3) | 2.48 |
Reducer | Gearbox |
XWD400 |
Mixer Overall Size(m)(LxWxH) | 3.1x1.3x2.3 |
Weight (kg) | 10200 |
Floor area needed (m2) | 80M2 |
Choose a trouble free expert to custom make your Road line thermoplastic marking paint production machine
Henan Ant Constructions is one of the earliest producer of kinds of dry mix thermoplastic road paint mix machine in China. Therefore, it gone through the whole history of road paint application in China and summerized rich experiences in improving formula and solutions for kinds of problems during application, such as cracking, adhesive strength, light reflection, etc.
Henan Ant Constructions design suitable formula according to your local materials feature and also provide kinds of suitable chemical additives, cooperated lab for making different testing of additives and finished thermoplastic paint is available too.
