Tile adhesive dry mortar chemical additive polymer
What is Tile adhesive dry mortar chemical additive polymer?
This new developed polymer powder is white powder with fluidity.
It is scientifically processed by German technology and imported raw materials.
It is non-toxic and tasteless, non-radioactive, and can be quickly dissolved in cold water without heating. It has fast dissolution, low dosage, high viscosity and fast film formation.
Good retention, aging resistance and good workability.
Use method is simple, convenient, stable in performance and long in shelf life.
It can replace latex powder, polyvinyl alcohol, 107 glue and 801 glue.
It can be used in lime powder, talcum powder, hydrated lime powder, cement, gypsum, etc.
It has excellent water retention, workability and bond strength.
Main Parameters-Tile adhesive dry mortar chemical additive polymer
Appearance | white powder, free-flowing |
Solid content | ≥98.0% |
Ash content | 11%±2 |
Bulk density | 450−550 g/l |
Average particle size | ~80 μm |
PH value | 5.0-8.0 |
MFFT | 0℃ |
Tg | -8℃ |
Usage method-Tile adhesive dry mortar chemical additive polymer
A. Instructions for use in dry powder:
1. This product can replace other polymer powder used in the tile adhesive and tile grout. The amount of ordinary wall tile adhesive added in the inner wall can be 6-7KG (add bentonite as needed), and the amount of water-resistant putty is 5-6KG.
2. It can also be added in thermal insulation mortar, tile adhesive, gypsum mortar, etc., which can increase the adhesion and improve the construction.
B. Instructions for the preparation of glue:
1. Add 18-20kg of this type polymer in one ton of water, stirring for 15 minutes and dissolve completely into glue. (You can increase or decrease the amount of this polymer powder according to local requirements)
2. After the glue is prepared, it can be mixed with lime powder, hydrated lime powder, cement and gypsum powder.
