Polymer for improving cement based tile adhesive mortar
General introductions-Polymer for improving cement based tile adhesive mortar
1. RP-5010 synthetic resin emulsion powder is a white, non-toxic, polymer powder materials with good film forming properties, film has excellent bonding strength.
2. RP-5010 synthetic resin emulsion powder is a versatile polymer powder, can be used in building materials and adhesives as binders In general cement mortar formulation,
3. Testing shows RP-5010 redispersible polymer powder adhesive strength is close to the national standard requirement 0.1 Mpa in 7days, actual test result is 0.097 Mpa, this is because the strength of the cement can only reach 70% in 7dasys, with the cement strength increasing in 14days, adhesive strength meet the national standards. After soaking as per national requirement, RP-5010 redispersible polymer powder adhesive strength exceeded national standard, up to 0.126 Mpa after 28days, and all the broken surface is located inside of XPS board, but other redispersible polymer powder strength not stable or could not meet the national standards, Therefore, to compare with other redispersible polymer powder, RP-5010 redispersible polymer powder with better flexibility, excellent volume stability, and better water retention performance, These advantages make RP-5010 redispersible polymer powder always in strong bonding adhesion, and usage qty is lower than other redispersible polymer powder.
Main parameters-Polymer for improving cement based tile adhesive mortar
Anti-cracking mortar 1kg formula, strength comparison
Price/kg | RDP(Redispersible powder type) | HPMC
(g) | Cement
（g） | Sand
（g） | Calcium powder（g） | Adhesion (Mpa) | Dynamic cracking (mm) |
25 | RP-5010
15g | 3 | 350 | 500 | 150 | ≥0.7 | ≥ 0.4 |
30 | Wacker 5010
20g | 3 | 350 | 500 | 150 | ≥0.7 | ≥ 0.4 |
30 | Clariant LDM1646
20g | 3 | 350 | 500 | 150 | ≥0.7 | ≥ 0.4 |
29 | Rhodia PSB150 20g | 3 | 350 | 500 | 150 | ≥ 0.65 | ≥ 0.38 |
27 | Another chinese brand
20g | 3 | 350 | 500 | 150 | ≥ 0.6 | ≥ 0.35 |
Main applications-Polymer for improving cement based tile adhesive mortar
Adhesive mortar,
Base coat mortar,
anti-cracking mortar for external wall,
ceramic tile adhesive, grout,
flexible putty for external wall,
fluorocarbon putty,
self-leveling mortar,
interface mortar.
How to pack and ship chemical addtives polymer for tile adhesive and cement based mortar
25kg/bag, stacking height less than 6bags.
Storing in cool dry place, recommended expire after 6 months.
Usage instructions method of chemical addtives polymer for tile adhesive and cement based mortar
a. Instructions for use in dry powder:
1. This product can replace other polymer powder used in the interior and exterior wall putty. The amount of ordinary putty added in the inner wall can be 6-7KG (add bentonite as needed), and the amount of water-resistant putty is 5-6KG.
2. It can also be added in thermal insulation mortar, tile adhesive, gypsum mortar, etc., which can increase the adhesion and improve the construction.
b. Instructions for the preparation of glue:
1. Add 18-20kg of this type polymer in one ton of water, stirring for 15 minutes and dissolve completely into glue. (You can increase or decrease the amount of this polymer powder according to local requirements)
2. After the glue is prepared, it can be mixed with lime powder, hydrated lime powder, cement and gypsum powder.
