Ingredient recipe formula C1 and C2 ceramic tile adhesive
Author：ANT CONSTRUCTIONS Comefrom： Createdate：2020/11/9 15:26:42 Hits：460
The best ingredient recipe formula C1 and C2 ceramic tile adhesive
What is C1 and C2 ceramic tile adhesive
Ceramic tile adhesive is a compound materials of sand, cement and some chemical additives which premixed as a certain formula or receipe. Ceramic tile adhesive can be calssified C1 and C2 standard, and it mainly used for floor and wall ceramic tiles in house decoration work.
Tile adhesive is also called tile glue, viscose cement and other names. It is a new type of material for modern decoration. It replaced the traditional sand cement. The adhesive strength is several times of cement mortar. It can effectively paste large ceramic tiles. To avoid the risk of tile falls, it has good flexibility, can prevent hollow. It is mainly used for pasting decorative materials such as internal and external wall tiles, floor tiles, etc., and is widely used in bathroom, kitchen and other building decorative places. Its main characteristics are high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction. It is an ideal bonding material. Stir directly with water and scrape it to the back of the tile for use.
The main standard and testing methods of C1 ceramic tile adhesive
C1 ceramic tile adhesive | Test Method | Minimum requirement |
Normal Cement Based Adhesive C1 | Tensile adhesion strength | ≥ 0,5 N/mm2 |
Tensile adhesion strength after heat ageing | ≥ 0,5 N/mm2 |
Tensile adhesion strength after freeze-thaw cycles | ≥ 0,5 N/mm2 |
Tensile adhesion strength after water immersion | ≥ 0,5 N/mm2 |
Open time tensile adhesion strength | ≥ 0,5 N/mm2 after not less than 20 minutes |
The main standard and testing methods of C2 ceramic tile adhesive
C1 ceramic tile adhesive | Test Method | Minimum requirement |
Improved Cement Based Adhesive C2
| Tensile adhesion strength | ≥ 1.0 N/mm2 |
Tensile adhesion strength after heat ageing | ≥ 1.0 N/mm2 |
Tensile adhesion strength after freeze-thaw cycles | ≥ 1.0 N/mm2 |
Tensile adhesion strength after water immersion | ≥ 1.0 N/mm2 |
Open time tensile adhesion strength | ≥ 1.0 N/mm2 after no less than 20 minutes |
What are the recipe formula ingredients of the ceramic tile adhesive compound?
The recipe formula of the floor and wall ceramic tile adhesive is very different, wall tile adhesive has higher requirement in cement, sand gradation and chemical additives. Currently some tile adhesive mixer machine supplier also promise to provide tile adhesive formula recipe to their customers, however, they are normally provide customers a theory formula recipe which ask customers add as much chemical addtives as possible, but they never considered the tile adhesive production cost at all, their irresponsible action leads to their customers can not sell such a high cost tile adhesive on the market and caused a lot loss to their customers.
Ant Construction is one of earliest producer of kinds of tile adhesive& grout, wall putty and other kinds of dry mortar product in China, we have gone through the whole history of tile adhesive& grout and wall putty application in China, we summerized rich experiences in improving tile adhesive and putty formula and solutions for kinds of problems during application, such as cracking, falling off after drying, adhesive strength, thermal insulation, water retention, etc.
We can also design suitable formula according to your local materials feature. Meanwhile, we also provide kinds of suitable chemical additives, and we have our lab for making different testing of additives and finished mortar.
Therefore, our formula recipe ingredients are from actual production experience, it is not only acceptable by market and cost saving, it is also workable in real production.
If you have any interest about the tile adhesive mixer machine, formula recipe of tile adhesive, you can contact us for more details.
