Traffic road striping line paint mix production machine
Author：ANT CONSTRUCTIONS Comefrom： Createdate：2021/6/3 8:59:27 Hits：35
Thermoplastic traffic road striping line paint mix production machine
Formula of Thermoplastic traffic road striping line paint
The thermoplastic road marking paint formula is mixed with several pigments, a small amount of filler and solid additive. After stirring for 5 minutes, adding resin, plasticizer, liquid additive, stirring for 5 minutes, then adding other fillers for 5 minutes, discharging and packaging. The formulation of the coating is generally adjusted according to the temperature, the nature of the pavement and the specifications of the raw materials. The film-forming substance of the thermoplastic marking paint is used as a film-forming material, and its molecular composition directly affects the mechanical properties of the coating as well as the weather resistance and wear resistance. This small mini thermoplastic traffic road striping line paint mix machine is specially designed for our Indonesia customer and it is meet up all processing requirement of the thermoplastic paint. It is most simple thermoplastic paint production line which is manual feeding, weighing but automatic packaging production line, but capable to produce the same quality thermoplastic paint.
The main process procedure-Thermoplastic traffic road striping line paint mix production machine
1, Prepare raw materials as formula.
Except the large-scale fully automatic Thermoplastic marking paint production line which automatically measures and distributes the proportions, the small prodution uses manual batching of raw materials proportion and puts the proportioned raw materials into the mixer manually for mixed production. The Thermoplastic marking paint mixer can mix powder materials and liquid materials.
2, Materials feeding.
The equipment equipped with a screw feeder directly which lifting the materials from ground to mixer. There are two feeding methods, one is to use a bucket elevator for vertical feeding, and the average feeding speed is 7 kg/s (tested with 200 mesh materials); the other is to use screw conveyor feeding inclinedly,this feeding equipment is low cost, easy production and equipment maintenance.
3, Mixing.
The mixing work is finished by thermoplastic paint mixer. Thermoplastic paint mixer is normally use single shaft ribbon bype mixer, mixing cycle time is about 20-30 minutes.
4, Packaging.
Choose trouble free supplier for Thermoplastic traffic road striping line paint mix production
Your expert in turnkey plant solution for modular design thermoplastic road marking paint processing and mixing plants
Ant Construction Machinery commitment to customer care, right from the initial enquiry through to project completion, is to ensure total customer satisfaction; confidence in our products and to be available when you have an enquiry or require support.
If the production of consistent, high quality yet economical thermoplastic traffic road paint is your goal, Ant Construction machinery is your best choice in China. Contact us now for more you want...
