Malfunction and treatment methods of wall putty powder dry mix machine

A. Shaft broken  in the reducer of of wall putty powder dry mix machine

The reasons:

1. The reducer works frequently and the shaft is broken due to the output torque overload.

2. The output end concentricity of the reducer on the wall putty powder dry mix machine is not up to the standard, this belongs the quality problem of reducer.

Solution:

When purchasing equipment, it is necessary to check the equipment and replace it if the problem is found. Meanwhile, In the production process, it is necessary to consider the overload capacity of the drive motor on wall putty powder dry mix machine  and its own maximum working torque to avoid the shaft broken.

B. The wall putty powder dry mix machine is unable to run or run in weak situation.

The reasons:

1. Short circuit inside the motor, it belongs to circuit problem;

2. Long-time over workload

The solutions:

Stop the machine, check whether there is a short circuit inside the machine, and then carry out daily maintenance to reduce the overload working.

C. The exhaust, operation and sound all are abnormal in wall putty powder dry mix machine engine

Reason: 

This needs to be eliminated one by one to avoid the workload is too large

Solution: 

Daily maintenance should be carried out and dealt with in time if any one problem happend.

• Previous：How to produce thermoplastic road marking…
• Next：What is skim coat-Advantages And Disadvan…