Error& Reason analysis of wall putty mixer equipment machine
Author：ANT CONSTRUCTIONS Comefrom： Createdate：2021/1/13 8:54:16 Hits：23
Error& Reason analysis of wall putty mixer equipment machine
When using home made wall putty mixer equipment machine, if the putty powder production machine does not work, first analyze the reasons of not working. As a professional manufacturer of wall putty powder production equipment, ANT CONSTRUCTION will help you analyze the reason of the wall putty powder production equipment machine failure.
Voltage error of wall putty mixer equipment machine
First, check whether there is a problem with the voltage. The Home made wall putty mixer equipment machine is a machine that runs on 3 phase electricity. If the putty powder production equipment machine is turned on but there is no response, First, check whether the voltage is too low. Because the motors of putty powder production equipment machine are 3 phase motors, when the voltage does not reach the rated voltage, the motor will not start, so first check the voltage.
Wire errors of wall putty mixer equipment machine
Secondly, if there is no problem with the voltage, check whether the wires are in poor contact, because the motor terminals of the wall putty powder production equipment machine are generally aluminum posts. If the temperature in the production workshop is too high, it will easily lead to oxidation of the wire pillars and it results in poor contact. If one of the three wires is in poor contact, the motor will not work and the power supply will not be good. It is best to ensure that the thread is not too thin. If you find that this is the reason, just re-tighten the electric wire.
Lubrication Oil in reducer of of wall putty mixer equipment machine
The third and most important reason is to check the oil of the reducer. Many customers ignore this problem during use. If the reducer oil volume is too small, or the reducer oil has not been replaced for a long time.
