Differences among emulsion paint, wall putty powder, wall paint
Author：ANT CONSTRUCTIONS Comefrom： Createdate：2020/11/17 14:15:28 Hits：33
Difference among emulsion paint, wall putty powder, wall paint
Latex emulsion paint, wall putty powder and paint are all wall decoration materials at present. What are the differences among them? And how to buy?
Latex emulsion paint:
Latex paint is divided oil paint and latex paint base on the type. The base primer plays a role of sealing and isolation, moisture and mildew resistance also depends on the base primer. Primer is divided top coat and base primer from the function of the paint. Latex emulsion paint includes latex paint primer and latex paint top coat. The primer of latex paint has alkali resistance and moisture resistance, which increases the combination of topcoat paint and base layer. So it is recommended to use base primer. The function of top coat is decoration and beauty; latex emulsion paint is the name of both.
Putty powder:
The main wall putty purpose is to fill the pores of the construction surface and correct the curve deviation of the construction surface and obtain a uniform and smooth paint surface. Wall Putty is divided into oily putty and water-based putty, which are used for paint and latex paint construction respectively. Putty is divided into finished putty and on-site making putty.
How to choose wall putty powder:
On wall putty powder market, they are roughly divided into:
Interior wall putty, used for interior wall decoration.
Exterior wall putty, used for outdoor wall decoration.
Wood lacquer, used for wood surface decoration, can be subdivided into wood lacquer for wood floor and other surfaces.
Metal paint, used for metal surface decoration.
Floor paint, used for indoor and outdoor cement floor decoration.
Classification of paint:
According to the form of paint, it can be divided into water-based paint, solvent-based paint, powder paint, high-solid paint, etc.;
According to the construction method, it can be divided into brush coating, spray coating, roller coating, dip coating, electrophoretic coating, etc.;
According to the construction process, it can be divided into primer, intermediate coat, paint (second primer), top coat, finishing paint, etc.;
According to the function, it can be divided into decorative coatings, anti-corrosion coatings, conductive coatings, anti-rust coatings, high temperature resistant coatings, temperature indicating coatings, thermal insulation coatings, etc.;
According to the purpose, it can be divided into architectural coatings, can coatings, automotive coatings, aircraft coatings, home appliance coatings, wood coatings, bridge coatings, plastic coatings, paper coatings, etc.
Characteristics of paint:
Workability: The performance index of the paint when it is used. Good paint should be easy to brush. Inferior products have a dry feeling when applied, and it is not easy to apply smoothly.
Low temperature stability: It is the performance of whether the coating can be stored stably at low temperature. The quality of high-quality paint will not change after being stored at low temperature, while poor-quality paint will cause deterioration and cannot be used.
Drying time: How long can the paint be dried for use after application. Drying time that is too long or too short is not good.
Appearance of the coating film: The appearance state of the paint film after drying. A good appearance should be smooth and free of bubbles, sagging, and severe paint marks.
Contrast ratio: the ability of the paint to cover the substrate. The higher the value, the stronger the covering ability.
Alkali resistance: Walls are generally alkaline, so the paint used on the wall must have a certain ability to resist damage by alkaline substances. Paints that are not resistant to alkaline substances will discolor, fall off, and fall off.
Scrub resistance: The paint's ability to withstand scrubbing. When scrubbing with water is required, the paint will not peel off a lot and expose the substrate.
We will inform you about the latest news and trends in the drymix mortar industry, Latest drymix plant concept and technology. Ant Construction is dedicated to product innovations and recent developments from this special area of the construction materials sector.
Ant Construction Machinery highly focus on service in order to provide a comprehensive solution to customers including before-sales service and after-sales service. 7*24 after-sales service is available to all our clients. All our after-sales service representatives are well trained with strict system to ensure top quality service, especially for international clients. We always care about your mixer running and after-sales service is always at your side to ensure everything runs perfectly with guaranteed quality and performance.
