Common motor faults in wall putty tile dry mortar powder mixer
Author：ANT CONSTRUCTIONS Comefrom： Createdate：2020/10/19 9:01:01 Hits：22
Common motor faults in wall putty tile dry mortar powder mixer
The electric motor plays the most important role in the wall putty tile dry mortar powder mixer. Just like the engine of a car, the engine power seriously affects the performance of the car. For the same reason, improper selection of the motor has a great impact on the performance of the wall putty tile dry mortar powder mixer.The power of the electric motor must be matched well, if used too small power motor for the mixer, overloading of the motor will easily cause the motor to be burned out, if used too big power motor for the mixer will cause a waste of resources and increase investment costs. Therefore, it is very important to use the right power motor for t he wall putty tile dry mortar powder mixer. So,
what are the common motor failures and precautions for the applications of wall putty tile dry mortar powder mixer?
First of all, the wall putty tile dry mortar powder mixer motor are 3 phase, it cannot be started if used 2 phase or single phase power. If it is forced to start frequently, it is easy to cause the motor damage.
Secondly, the wall putty tile dry mortar powder mixer is prohibited starting at full load. wall putty tile dry mortar powder mixer must be started first and then start to feed materials. If there is a sudden power off failure during the operation of the mixer, it is necessary to restart the mixer after releasing the materials through the cleaning door and the discharge port under the mixer.
Third, the putty powder mixer motor needs to be used with the reducer, and the reducer must be refueled in advance. The reducer is like the gearbox of a car. Lubricating oil should be added when using it. Using the reducer without oil will cause the wear of the reducer and damage the reducer. The reducer oil needs to be replaced regularly. Under normal circumstances, it needs to be replaced 2-3 times a year. If the output is large, the frequency of replacements needs to be increased to ensure the normal operation of the mixer.
All in all, during the use of the putty powder mixer, one of the most prone to motor problems is that the motor is unable to overheat. In this case, the main reason for the failure is that when the motor is running in two phases, there is a short circuit inside the motor, or because of long-term overload operation. When encountering such a situation in working, it is best to stop the machine, carry out corresponding inspections, and reduce its operating load to improve such problems.
Ant Construction has always insisted on using the national standard copper core motor in the wall putty tile dry mortar powder mixer. All motors and reducers warranty time is 12 months. If you have any problems during the use of the machine, please contact us in time, after-sales service 0086-15237170875, we will help you solve it as soon as possible.
