How to process dust produced by the tile adhesive mix machine
Author：ANT CONSTRUCTIONS Comefrom： Createdate：2020/10/14 16:40:08 Hits：27
How to process dust produced by the tile adhesive mix machine
As one of the main dry powder mixers tile adhesive mixer machine, because the machine itself mixing dry powder materials, which is different from the common concrete mixer with water, so thetile adhesive mixer machine is easy to produce dust during the working process. If these dust not handled well, it will have a big impact on the environment and the health safety of workers. How to process the dust generated during the working process of the tile adhesive mixer machine? Ant Constructions recommend you below tips.
Sealing work-How to process dust produced by the tile adhesive mix machine
First of all, the tile adhesive mixer machine should be sealed during the manufacturing process to ensure that the tile adhesive runs in a closed space during the mixing process. In addition, install dust-proof cloth at the exhaust port of the tile adhesive mixer machine to filter the dust which released from the mixer. So as to ensure no dust is generated during the operation of the mixer.
Dedusting at the position where produces dust-How to process dust produced by the tile adhesive mix machine
Secondly, during the production process of the tile adhesive mixer machine, most dust come from the materials feeding and discharging position, The dust removal of the feeding port and the outlet port is particularly important. Ant Construction recommends customers who have sufficient budget can use simple horizontal tile adhesive mixer machine which equipped with dust collector, the commonly used dust removal equipment is the pulse dust collector, dust removal equipment in the tile adhesive automatic mix plant. For equipment that is not equipped with pulse dust collector, it is necessary to do a good job of dust prevention at the inlet and outlet. Workers wear dust masks to minimize the generation of dust.
Sealing at any position where may have dust-How to process dust produced by the tile adhesive mix machine
Third, although the automatic tile adhesive production plant is equipped with dust removal equipment, the sealing of the equipment is also very important. Sealing is an important method to reduce dust generation. Seal the complete set of tile adhesive equipment and seal the jointion of each interface, then find the dust-emitting parts of the equipment, good equipment and equipment design and production should to prevent dust, but the feeding and packaging positions are the two main "dust points". Add the dust removal equipment interface to these position, improve the connection of the equipment and and install dust removal equipment is the fundamental solution to reduce dust when producing tile adhesive.
Energy saving and environmental protection has always been the research and development direction of Ant Constructions. As a widely used dry powder mixing equipment, reducing the impact of dust on the environment is also the direction of our efforts. To choose an environmentally friendly tile adhesive mixer machine, please visit the official website of Ant Construction antdrymix.com
