Fult detection for dry pack wall adhesive mortar mix plant
Author：ANT CONSTRUCTIONS Comefrom： Createdate：2020/10/8 14:13:55 Hits：20
Fult detection for dry pack wall adhesive mortar mix plant
Dry pack cement sand based wall adhesive mortar batch mix plant equipment produced by Henan Ant Constructions has always been praised by the industry for its excellent quality and high efficiency and energy-saving quality, and has gradually become a brand advantage of Ant Constructions. But the best dry mortar mixing plant is also have kinds of small problem in production. The following will share with you the basic skills of dry mortar mixing plant fault inspection-"seeing, hearing, asking and touching".
Methods of Fult detection for dry pack wall adhesive mortar mix plant
"seeing, hearing, asking and touching" is the basic medical treatment method that our Chinese medicine practitioners have always used. This method is also applicable to the fault inspection of dry powder mortar mixing plants.
Seeing-Fult detection for dry pack wall adhesive mortar mix plant
observe the operation of the mixer through eyes to see if it is running smoothly, check whether there is unsmooth materials feeding, discharging and material leakage, check whether the oil volume in the reducer is normal and whether there is oil leakage (PS: a small amount of oil leakage is allowed), if the oil is lower than the standard line, you need to add the oil in time.
Hearing-Fult detection for dry pack wall adhesive mortar mix plant
there will be abnormal noises when the mixer has problems during operation. These can be heard through the ears. If there are abnormal noises during dry mortar mixer machine working, you need to pay attention to the source of the abnormal noises. The most abnormal noise are from the reducer , inside of mixer, conveying and lifting equipment. The abnormal noise of the reducer is generally caused by insufficient lubricating oil or overloaded operation, it is necessary to add oil and reduce the load capacity of mixer (PS: the mixer is strictly prohibited to start at full load which will cause damage to the motor and reducer). The abnormal noise of the mixer, conveying and lifting equipment needs to be checked if any other objects inside the equipment, the foreign objects should be cleaned up in time to avoid large damages. In addition, it is necessary to detect peculiar smell through the nose in time and look for the source of peculiar smell to prevent fire caused by poor equipment contact and heating of cables.
Asking-Fult detection for dry pack wall adhesive mortar mix plant
by asking the relevant operators of the mixer to understand the operation of the machine, consult to see if there is an abnormal phenomenon, analyze the abnormal situation in time, find out the reason and solve the problem.
Touching-Fult detection for dry pack wall adhesive mortar mix plant
some parts of the dry mortar mixing plant will generate heat during operation, and the heating temperature will have a certain range. For example, the motor, reducer, and cable harness generate heat during the operation. If the heat exceeds the range, it may cause equipment damage. Regularly touch the heat-prone parts with your hands to check whether the temperature is normal and effectively avoid failures.
There are various inspection methods for dry mortar mixing plant, the method of "seeing, hearing, asking and touching" is relatively simple and practical. This method is not only suitable for dry mortar mixing production line, but also suitable for other wall putty tile adhessive mixer machine produced by Henan Ant Constructions Machine Mateirals CO., Ltd. If you find a problem during the working of the equipment, please contact us in time, our professional customer service staff will serve you better.
