Stone texture outlooking lacquer mixer machine failure analys

Common faults of horizontal Stone texture outlooking lacquer mixer machine:

1. The running noise of the Stone texture outlooking lacquer mixer machine is too loud, please check the reducer if filled with lubricating oil, the reducer is not filled with lubricating oil before leaving the factory, and the customer needs to add the lubricating oil before use;

2. The abnormal sound of the Stone texture outlooking lacquer mixer machine, it is usually caused by the debris. First check and clean the debris, and then re-run;

3. The motor is running weak and rotating abnormally. This fault is usually caused by the two-phase operation of the motor or the voltage is too low.  Stop and check immediately, use a voltmeter to measure whether the voltage is normal (the rated working voltage of the Stone texture outlooking lacquer mixer machine is 380V ), check if it is 3 phase industry power;

4. The bearing is overheated. Check if the bearing is lubricated enough, lubricating oil needs to be added regularly. If it runs without oil for a long time, the bearing may be damaged and the bearing needs to be replaced;

5. The mixing motor of the Stone texture outlooking lacquer mixer machine is not running. Please check if the mixing barrel locking device is locked and the limit switch if back (as shown in the figure below). To ensure safe operation, Henan Ant Constructions Stone texture outlooking lacquer mixer machine has multiple limits and locks The device needs to be all in the correct position for the stirring motor to run.

• Previous：Selection tips-stone effect external…
• Next：Construction technology and attentions fo…