Why materials reverse moving in screw conveyor during production
Author：ANT CONSTRUCTIONS Comefrom： Createdate：2020/9/24 10:36:01 Hits：21
Why materials reverse moving in screw conveyor during production
The applications of screw conveyor in wall putty production
Our multifunctional wall filler putty ribbon blender mixer machine is one of the widely used models, its application involve metallurgy, building materials, chemicals, food, etc. Common horizontal ribbon blender mixer machine and dry powder mortar mixers belong to this kind mixer. ribbon blender mixer machine is equipped with a screw hoist, which adopts spiral lifting, and is designed with a feeding port for easy feeding. Generally, a pit is dug during installation, and the feeding port is leveling with the ground for convenient feeding. Generally speaking, this hoist is evolved from the screw conveyor used in daily life. During the operation of the hoist, if there is material jam in the bearing or mateirals move in reverse direction. If the hoist screw augor frequently reverses moving, it will reduce the conveying capacity of the hoist. For a hoist with a large conveying capacity, the back-flowing material may cause damage to the motor. Excessive current will probably burn the motor and cause considerable economic losses.
How to do if materials reverse moving in screw conveyor.
If the materials move in reverse direction in the screw hoist, Please follow bellow steps:
Check motor wire connection-Why materials reverse moving in screw conveyor during production
firstly check whether the motor wire connection is correct. Our screw conveyor of wall filler putty ribbon blender mixer machine is affixed with an arrow indicating the direction of rotation before leaving the factory. If the direction of rotation is not correct, the material will flow back on site. If the screw hoist is not marked with the arrow indicating the correct optional direction, it is likely to be lost during long-distance transportation or working. Please contact Henan Ant Machinery for consultation.
Check voltage-Why materials reverse moving in screw conveyor during production
Secondly, check whether the voltage is correct and working phase is single or three pahse. The voltage of the screw hoist is 3 phase industry power and voltage should be use your standard voltage. The wrong phase will cause the motor to be weak and unable to start, and it will damage the motor for a long time.
Check if blocked inside-Why materials reverse moving in screw conveyor during production
Finally, check whether there is any other material inside the screw hoist. Since the feeding port of the hoist is located under the ground, a little carelessness can easily cause the non necessary part fall in the feeding port.
In addition, customers who use bagged materials may cause woven bags to enter the hoist and cause problems. The machine is blocked and the flow is reversed. If this happens, you need to stop the machine immediately for inspection and remove the non-neccessary parts to prevent the small loss.
In short, the special screw hoist on the ANT CONSTRUCTIONS dry powder mixer is an important part of the whole set of equipment. Inspection and maintenance must be done during use to ensure the smooth progress of production. Regular maintenance will also extend the service life of the equipment. More technology Please pay attention to the website of antdrymix.com
